Creating Structural Connection Family for Cross-laminated Timber (CLT) – Part 1 – Video Demonstration

Hello everyone. I managed to find some time to create a recording of my previous post HERE.

Looks like I have forgotten to parametize the thickness of the circular void for 3No_Holes. All you have to do in this case is to “Edit Group” then highlight the 3 holes and assign the “Thickness” parameter the same way we did for the 2No_Holes.

Here is the link for the “Circular Void” Generic Model void family and “Bolt_3D_2017” family that I used in this exercise.

https://www.dropbox.com/s/t8ts66jfyp00zzx/Circular_Void_2017.rfa?dl=0

https://www.dropbox.com/s/c1eozd0aawx6ix2/Bolt_3D_2017.rfa?dl=0

If I’ve left out any info that you want, or if you have any questions, just let me know and I’ll do my best to answer!

I am open for discussion should you want help in producing Revit family for your product.

Here is the link for the video: Creating Structural Connection Family for Cross-laminated Timber (CLT) Video Demonstration

Cheers.

Allan Cantos